7067 AES-IntelliTap Accessory

<p>The  AES-<em>IntelliTap </em>7067 is a full data module for burglary and fire monitoring which utilized dialer capture from the Digital Alarm Communicator Transmitter (DACT). </p> The  AES-IntelliTap 7067 is a full data module for burglary and fire monitoring through the Digital Alarm Communicator Transmitter (DACT). It is UL listed for both UL 864 Fire as well as AA Burglary applications. The IntelliTap monitors the alarm panel’s digital communicator output.  In normal operation, the alarm panel dials the IntelliTap designated phone number as the primary Central Station receiver. The IntelliTap detects this information and receives the data like a dialer receiver, providing handshake signals to authenticate a successful transfer. The alarm data is then forwarded, via the AES-IntelliNet wireless network, to the Central Station.

  • Supports formats such as 3+1, 4+1, 4_2, and CID
  • Telephone line cut monitoring with adjustable 1,2,3 minute delay
  • Works with or without a phone line
  • DTMF Compatible
  • Full POTS emulation
  • Configurable simultaneous dual delivery mode

  • I/O Connections (AES Subscriber/handheld programmer; RS232 data link; incoming phone line; phone output from alarm panel; house phone)
  • Supports 3+1, 4+1, 4+2, Contact ID formats
  • Controls (1 reset switch; jumper pins for programming)
  • -3.9” x 5” x 1” (9.9 x 12.7 x 2.5cm)
  • Mounts inside AES RF Transceiver unit
  • 12 VDC nominal, primary and backup power provided by the AES RF Transceiver unit
  • 50mA normal; 320mA when trouble output is activated; A 12V, 7A-hr battery provides 24-hour backup
Comments are closed.