 The
1710-EZ Kit
... is Easy!
• Wireless is
Easiest to Install!
• Easy to Use!
The EZ kit is based on the tried and true
1700 design, with the added advantage of wireless capability. The
1710 alarm panel includes a 2 zone receiver, providing wireless coverage
for the duress and intrusion functions.
The system is ideal for apartments, where only the front and back
doors require protection - assuming that the windows are not accessible
to intruders. The system includes 2 wireless door (or window) transmitters,
plus a wireless duress transmitter. Extra transmitters and sensors
can be added
Key Features
• 4 Wired Zones
• 2 Wireless Zones (overlaid),
Intrusion and Duress
• 110/220V - 50/60Hz Power
Input
• Steel Case
• Easiest to Install
• Easy to Operate
1 - 4-Zone Wired
/ 2-Zone Wireless Alarm Panel, #1710, provides 4 hardwire
zones with 2 wireless zones (overlaid) for duress and intrusion.
Up to a total of 30 sensors may be used on the 2 wireless zones.
1 - Duress Transmitters, #1715 (DXT-21),
activates the duress channel, sounding the siren whenever the button
is pressed.
2 - Door/Window Transmitters, #1720 (DXT-31),
wireless transmitters includes a built in door/window
contact sensor. May also be used with external sensors.
Links the sensor to the alarm panel without wires - fast
and easy to install.
8 - Wired Magnetic
Contact Switches , #0024, heavy duty sensor for doors and
windows, hardwires to the control panel or transmitter.
2 - Wired Panic Switches, #1209, simple
but important protection for every alarm system, hardwires
to the control panel (for wireless panic, see #1715).
1 - Heat Sensor ,
#FF-135, detects heat in excess of 135 degrees F, a back up (not
a substitute) for smoke alarms.
250 Ft Roll of Wire, 24-2 for sensors,
#8052
50 Ft Roll of Wire, 20-2 for sirens,
#8053
1 - Indoor/Outdoor Speaker for Siren, #0818,
weather-resistant
1 - Backup Battery , 12V, 4.5AH, #8124,
provides power in event of a power failure
Mounting Hardware, for sensors and accessories
Manuals ,
for installation and operation
Wireless Accessories for 1710-EZ Alarm Kit
[ ] PIR Motion Sensor Transmitter, #1755 (formerly #DXT-54),
for 1710-EZ, covers a range of up to 40 feet (13 meters),
and includes a wireless transmitter for quick installation.
A powerful, easy to install detector.
[ ] Panic Transmitter,
#1715 (formerly #DXT-21), for 1710-EZ alarm, 1 is included with the kit - add more
if needed.
[ ] Door/Window Transmitter, #1720 (formerly #DXT-31),for
1710-EZ, 2 are included with the kit - add more if needed.
Accessories for
all 1700 Series Alarms
[ ] Keypad, #1723MB, arms or disarms
the system using a 12 digit keypad. Up to 4 keypads can
be used with each 1700 or 1710 alarm panel. Includes back
box.
[ ] Strobe Beacon, #0350C, provides
bright flashing annunciation whenever the siren sounds.
Includes mount, red lens, and relay interface for
1700 or 1710 alarm panels.
[ ] PIR Motion
Sensor, Hardwired, #5520, for 1700 or 1710-EZ, covers a
range of up to 40 feet (13 meters).
[ ] Indoor Speaker, #0818, provides additional
annunciation inside the home, also provides a backup for
the outdoor speaker horn provided in the kit. Up to 4
speakers can be used with each alarm panel.
[ ] Outdoor Speaker
Horn, #0812, add more noise for notification outdoors (or
in). Up to 4 speakers can be used with each alarm panel.
[ ] Heavy Duty
Power Supply, #720-14, for 1700 or 1710-EZ alarm panels,
provides rugged protection against power problems such as brownouts,
surges and over-voltages . Operates on 90-260V, 44-400 Hz ... and
everything in between.
[ ] Panic Switch,
Hardwired, #1209
[ ] Door/Window Magnetic
Contact Sensor, Hardwired, #0024, 8 are included
with the kit, add more as needed.
[ ] AES-IntelliNet
Long Range Radio Transceiver, click
here for more information,
[ ] Relay Interface, #5104,
activates secondary device whenever siren sounds, Form C relay, SPDT,
contacts rating 3A
DOWNLOAD BROCHURE
|
